What to Do When Your Water Heater Suddenly Stops Working: Tips

Book

Nearly everybody will have their own individual piece of advice in relation to No Hot Water — Water Heater Repair.

Numerous contemporary homes use an electric hot water heater for their furnace, as a result of its comfort and ease of use. Nonetheless, just like any other electric devices, issues may arise with its use, all of a sudden. It can be truly aggravating to wake up to a cold shower instead of a warm one or having your bath with water that isn't hot adequate and even too warm. Whatever the situation may be, water heater problems can be quite aggravating. Luckily, we've made a checklist of feasible solutions to your hot water heater concerns. There are a variety of elements that might create a number of these problems, it could be an issue with the power supply, the electric heating element, or the thermostat. Before doing anything, guarantee you shut off the main power supply for safety. Whatever the trouble is, getting it dealt with need to not posture excessive of an issue if you adhere to these steps:

Check Your Power Supply:

As standard as this may appear, it is extremely necessary. Without adequate power, your hot water heater will not function. So the first thing to do when your water all of a sudden stops working is to validate that it isn't a power issue. Inspect if the fuse is blown out or the circuit breaker tripped. If the breaker is the problem, simply transform it off and on again. Change any busted or worn-out fuse. Evaluate the home appliance with power after these changes to see if it's currently working.

Examine the Burner in the Hot Water Heater:

If it's not a power issue, then attempt looking into your heating element if it is still functioning. Examine each of your heating elements to make sure the trouble isn't with any of them. If any one of them is faulty, replace that component and then inspect whether the warm water is back on.

Examine Your Thermostat:

If your hot water heater still isn't working or the water coming out isn't hot enough, you might need to check the temperature setups on your top thermostat. Ensure the circuit breaker is turned off prior to doing anything. Open up the accessibility panel and press the red button for temperature reset over the thermostat. This ought to assist heat up the water. Transform the circuit breaker back on and examine if the trouble has been dealt with.

Call An Expert:

If after changing all damaged components and also resetting your temperature, the water heater still isn't working, you might require to get in touch with a professional plumber for an expert viewpoint. The issue with your heating system could be that the hot and cold taps have been changed or it may be undersized for the quantity of hot water needed in your house. Whatever the situation might be, an expert plumber would certainly assist fix the issue.

Final thought

Hot water heater issues are not always significant. Most of them result from small problems like a blown fuse or damaged heating element. Replacing the defective parts should do the trick. However, if you are still unable to solve the trouble, give a call to your local plumber ahead to get it taken care of.

Common Reasons Why Your Hot Water Heater Isn’t Working

Water Gets Too Hot

Ouch! You wanted a hot shower, not boiling! If you have a newer model electric water heater, your water heater works with a thermostat (actually, two thermostats). If this thermostat has been jostled — or purposely reset — by someone in your home, the water flow will be much hotter than you expected.

FIX: Adjust the thermostat to a more moderate setting for producing hot water. Forty-nine degrees Celsius is recommended to prevent scalding.

Water Doesn’t Get Hot

This is the opposite of the previous problem, but it’s almost as bad. Your flow of hot water is merely lukewarm or even incoming cold water. Once again, an incorrect thermostat setting, or a faulty thermocouple in a gas water heater, could be to blame. Another explanation might be that there’s no power to the water heater (in the case of an electric heater) or the pilot light has gone out (if you have a gas unit).

FIX: Adjust your thermostat as necessary. If that doesn’t do the trick, check the power supply. Another possibility is the replacement of a damaged thermocouple in gas water heaters.

Leaking Water Heater

A leaking water heater (a sign may be low hot water pressure, or not enough hot water to shower) might be a reason to push the panic button… but first, take a few minutes to check where the leakage is coming from. Leaks near the top of the heater tend to indicate a problem with a valve, which won’t need a major repair. However, a leak from the water heater base is more serious.

FIX: You may need a qualified plumber to replace your drain valve or TPR (temperature pressure relief) valve. When your water heater is leaking from below, your plumber might be able to fix it if you call them soon enough. Otherwise, you will need to have a new water heater installed.

Noisy Water Heater

Sometimes your water heater might make some peculiar noises, loud enough to compete with your singing in the shower. Are these a cause for alarm? It depends on exactly what kind of sounds you are hearing. Sizzles and rumbles are both red flags, indicating a heavy sediment buildup in your hot water tank that might cause a breakdown in the near future. In addition, banging is a sign of a water hammer, which can lead to serious damage to your pipes.

FIX: To stop sizzling or rumbling, turn off the tank and have it flushed by a reliable plumbing company ASAP. Ask your plumber to install a water hammer arrestor to quiet down the banging and save the pipes.

Pilot Light Keeps Going Out

Many pilot lights go out once in a while, but when your water heater pilot light keeps going out continually, it’s a problem. And the chances are good that that problem stems from either a shortage of combustible air or a malfunctioning thermocouple.

FIX: Increase the air supply around your water heater by cleaning dust and lint off the appliance and clearing any clutter from the area around it. A bad thermocouple will require expert plumbing repair and is more than basic gas water heater troubleshooting.

Water Smells Bad

The water from your residential plumbing pipes should smell neutral. If it has a strong unpleasant odour, something’s wrong. To check whether your water heater is at fault, turn on a hot water faucet and let it run for a few minutes. And, yes, use your nose to determine exactly what you are smelling.

FIX: For a garlicky odour, relight the pilot light on your water tank. When you detect the scent of garbage, you’ll need a professional plumber to flush the hot water tank and possibly replace the anode rod. A strong smell of rotten eggs could signal a hazardous gas leak; turn off the gas supply if possible, get everyone out of your house, and make an emergency call to the gas company.

Water Looks Brown Or Rusted

The first thing to do is ask yourself, “Is the brown, rusty-looking water coming only from my hot water taps?” If the answer is yes, then most likely, either the anode rod or the water heater interior is starting to rust, especially if your hot water heater is nearing the end of its life expectancy. (A “no” answer means the issue does not originate from the hot water heater but rather from the water supply.)

FIX: Contact a plumber to inspect the water heater. If you catch the problem quickly enough, it might be fixable. Otherwise, you’ll need a water heater replacement. Consider installation of an efficient new tankless water heater.

https://www.huskyair.com/blog/hot-water-heater-isnt-working/

Hopefully you liked our piece about How to Troubleshoot and Repair an Electric Water Heater. Thank you so much for taking a few minutes to read through our article post. Those who enjoyed reading our post please don't forget to share it. Thanks so much for taking the time to read it.

Booking